UNIVERSAL MOTORS

by admin | Feb 28, 2016

UNIVERSAL MOTORS

TECHNICAL CHARACTERISTICS

NOVADAR INNOVA has a range of universal motors for a different applications. The universal motor is an economical solution widely used for small electrical devices that have rotation. In every universal motor, the inductor coils are in series with the armature through the collector. Typical applications for this type of motor are: machine tools, industrial cleaning devices, centrifuges and other laboratory equipment. These motors comply with the CE standard, and are manufactured in accordance with the low voltage directiven.

TABLE OF MODELS:

DC MOTORS

by admin | Feb 21, 2016

DC MOTORS

NOVADAR INNOVA designs and manufactures electric motors, direct current with permanent magnets, customized for the client or with standard couplings.In collaboration with our clients, the engineering department, we define the parameters and characteristics of direct current motors according to the needs that mark us the customer or electric application.

The motor casings are made of iron with anticorrosive treatment, for types CC-80 and CC-110 there is the possibility of equipping them with aluminum casing and self-ventilating. All motors are dynamically balanced. The supply voltages from 12 V to 200 V, the useful power up to 640 W, The nominal torque up to 1.7 Nm maximum and the speed up to 4800 rpm. The degree of protection is IP 54 and thermal insulation class F-155º.

APPLICATIONS: Our electric motors are used in multiple sectors; Nautical, Robotics, Solar Trackers, Vending Machines, Automotive Sector Lifts Railway Applications, etc …

CONSTRUCTIVES FORMS

TECHNICAL CHARACTERISTICS

TABLE OF MODELS:

Motor 4 poles, refrigerated IC 01, IP23

Motor 2 poles, refrigerated IC 01, IP23

MOUNTING DIMENSIONS DC MOTORS. Other Powers consult

GEARED MOTORS

by admin | Feb 21, 2016

GEARED MOTORS

NOVADAR INNOVA has an extensive range of geared motors for many applications among which are: vending, fluid transfer, laboratory equipment, electrical appliances, automatic doors, etc.. The power of these units can be both AC and DC, there are endless possibilities for the output speed of the gearbox and torque required.

Combined crown-worm gear motors: According to the indications of our clients, at NOVADAR INNOVA we carry out special assemblies such as combined crown-worm gear motors that consist of two speed reducers that are coupled to achieve greater and higher speed reductions. It is a very simple and inexpensive solution, but in this type of assembly a decrease in performance must be anticipated.

Worm gearmotors and standard execution: Both in the standard worm gearmotors and in the combined version, the assembly is carried out with motors of special manufacture requested by the customer or according to the IEC standard. Assemblies made in NOVADAR INNOVA are delivered with a B14 or B5 flange. (Consult other flanges)

DC geared motor with tachometric dynamo: Due to the great demand in the market, NOVADAR INNOVA has developed motors with speed regulated by tachometric dynamo. Also, and at the request of our clients, we develop applications with hall or encoders.

Motor reductor RM-Motor CC

Accionat per motor de CC; Parell màxim del reductor: 80Ncm.

RM900 -motor CC
Potència : 3,3W
Freqüència: 50Hz
Velocitat: 6.800 rpm

RM900 – motor CC
Potència: 6,6W
Freqüència: 50Hz
Velocitat: 7.000 rpm

Nota: En aplicacions amb reduccions elevades, haurà de reduir les prestacions de sortida un 10% a causa de la disminució del rendiment del propi reductor

Motor reductor RC-Motor AC

Accionat per motor d’AC; Parell màxim del reductor: 300Ncm

RC 920 -motor AC
Potència :9W
Freqüència:50Hz
Velocitat: 2.750 rpm

RC 940 -motor AC
Potència :15W
Freqüència:50Hz
Velocitat: 2.800 rpm

RC 960 -motor AC
Potència :15W
Freqüència:50Hz
Velocitat: 2.800 rpm

Motor reductor RD-Motor AC

Accionat per motor de C.A; Parell màxim del reductor: 150Ncm.

RD915 – motor AC
Potència: 7W
Freqüència: 50Hz
Velocitat: 2. 700 rpm

RD920 – motor AC
Potència: 9W
Freqüència: 50Hz
Velocitat: 2. 750 rpm

ELECTRONICS CONVERTERS

by admin | Feb 21, 2016

ELECTRONICS CONVERTERS

DC power plates:

AC power plates:

Besides electric motors NOVADAR INNOVA also supplies converters and electronic drives to control electric motors, whether asynchronous motors or brushless motors.Within the range brushless motors, there are two possibilities, motors with Hall sensors, which allow the motor to start when a low starting torque is required, or sensorless motors that do not require this type of boot.

Plates for direct current supply: For supply voltages of 12 and 24 Vdc with maximum motor amperage of 17, 34 and 67 A, that is to say 1600 W max. Standard speeds are 1500 or 3000 r.p.m. although there is the possibility of programming other speeds.

Boards for alternating current power supply: Asynchronous and brushless motor control for 230 V supply voltages and powers of 1.1 KW and 2.2 KW. These boards have a 0-10 V analog input, a digital input and the option with an auxiliary control circuit, as well as an input to read the motor temperature. Variable frequency drives automatically adjustable to voltages of 110 V or 230 V and that allow the control of asynchronous motors up to 15000 r.p.m. Converters for single-phase 230 V 50/60 Hz input and three-phase 230 V 200 Hz output, with powers up to 1.8 KVA. The plates have relevant protections to guarantee the correct operation and protection of the equipment. The design of these plates is made in order to comply with current directives and regulations.

VERNIS MOTORS has controllers for 230V 50 / 60Hz alternating current supply, as well as for 12 and 24V direct current supply for controlling synchronous and asynchronous motors and powers up to 2.2kW. The plates for alternating current supply have a 0-10V analog input and a communication option through an auxiliary circuit, as well as an input for reading the motor temperature, allowing total control over the motor. All of them are designed with over-current, short-circuit and over-voltage protection to guarantee the correct operation and protection of the equipment. Consult with our sales representatives for electronic controlled motors.

FLAMEPROOF MOTORS

by admin | Feb 21, 2016

FLAMEPROOF MOTORS

The flameproof motors manufactured by NOVADAR INNOVA are suitable for driving fuel pumps, pumps for printing machines, paint mixers, etc.They are motors that are intended to provide a safe service in environments where habitually or accidentally exist ignitable gases or vapours. To prevent the risk of explosion the motors are built according to the following standards: UNE- EN 60079-0 and UNE-EN 60079-1.The “Protection System” is defined in the regulations as: Protection by flameproof enclosure.

The “label” of these motors that harmonizes the protection system, the group of gases or environment vapours that it must protect and the maximum temperature of the motor, is: EEx d IIB T4 (For maximum temperature of 135 ° C).These motors are adequately approved and certified by an official laboratory.

TECHNICAL CHARACTERISTICS: